Canon MultiPASS F50 Fax Manual

Also see for MultiPASS F50: Reference guide Software user's guide Setup instructions User manual Specification

Contents

7-3The machine is factory-set to print a TX (transmission) REPORT only when an error occurs during sending. Tochange this setting, → TX REPORT, p. 9-4.If you set the machine to print a report, a TX REPORT or an ERROR TX REPORT, similar to the ones below,will be printed depending on the setting you select.TRANSMISSION OKTX/RX NO 0003 :COLOR TXCONNECTION TEL 1 432 2060CONNECTION ID Canon OPTICSST. TIME 12/27 14:59USAGE T 00’00PGS. SENT 0RESULT NG #018BUSY/NO SIGNAL12/03/2001 17:47 FAX 123 4567 CANON 001************************************************* ***TX REPORTTX FUNCTION WAS NOT COMPLETEDTX/RX NO 0004CONNECTION TEL 20 545 8545CONNECTION ID Canon EUROPEST. TIME 12/03 17:21USAGE T 00’18PGS. SENT 1RESULT NGTHE SLEREXE COMPANY LIMITEDSAPORS LANE•BOOLE•DORSET•BH25 8ERTELEPHONE BOOLE (945 13) 51617 – FAX 1234567Our Ref. 350/PJC/EAC December 3, 2001Dr. P. N. Cundall,Mining Surveys Ltd.,Holroyd Road,Reading,Berks.12/03/2001 17:21 FAX 123 4567 CANON 001***************************************************************** ***ERROR TX REPORT“:COLOR TX” INDICATES ACOLOR TRANSMISSION.IF YOU ENABLE THE PRINT WITH IMAGE SETTING(→ p. 9-4), THE FIRST PAGE OF THE DOCUMENTWILL PRINT ON THE REPORT TO REMIND YOU OFTHE CONTENTS OF THE DOCUMENT (FOR BLACK &WHITE DOCUMENTS ONLY).OK: TRANSMISSION SUCCESSFULNG: SOME OR NO PAGES SENTNUMBER OF PAGES SENTTRANSMISSION DURATIONTRANSMISSION TIMETX (Transmission) REPORT7Reports and Lists