84[Multi-Scan] in ScanGear MP (Simple Mode)To scan two or more small documents (photographs etc.) without specifying the scanning area etc.,use the [Multi-Scan] setting in ScanGear MP (Simple Mode). Each document becomes one singleimage.1 Place the document face-down on the platen glass.For placement of the documents J “Scanning two or more small documents at one time”2 Do one of the following.z Use a button in the MP ToolboxClick a button in the MP Toolbox, select [Use the scanner driver to make advancedsettings], adjust other settings, then click [Start].z Scan from an applicationWindows XP: If the system is set up for the WIA driver, switch to ScanGear MP (J“Scanning an image from an application” ) and select the command for scanning adocument in the application (e.g. [Import], [Acquire image]. See your applicationdocumentation).The ScanGear MP dialog box will open.3 If the [<< Simple Mode] is displayed, click [<< Simple Mode].J “Switching between Simple Mode and Advanced Mode”4 If you wish to see a preview, click [Preview].The document will be provisionally scanned as a preview.5 Click [Multi-Scan >>].6 Select the color mode and resolution.z [Color Mode]Select from [Color], [Grayscale] and [Black and White].z [Resolution]Select from [75dpi], [150dpi] and [300dpi]. The higher the number, the more detail in yourimage; the lower the number, the less detail.J “Determining resolution”z [Magazine]Suitable for scanning color magazines, with the Descreen function.
