Configure Océ Express WebTools settings for a mobile connectionIntroductionIf you want to give users easy access to Océ Mobile WebTools, the settings must first beconfigured. With the information you can develop a QR card to create easy access.NOTE• For this procedure, you need to log in as Key Operator or Power User.• Make sure you configure your Wi-Fi network and connect the printer to the network.Procedure1. Open the [Configuration] - [Connectivity] tab.2. Click [Edit] in the right hand corner of the [Mobile] section.3. Enter the settings. This information will also be printed on the QR card:NOTEEnter information according to your IT policy. Contact your system administrator formore information.Mobile section in Océ Express WebToolsSetting Action[Wi-Fi name on QRC sheet] Enter the name of your Wi-Fi network.The name will be displayed on the QR card.[Wi-Fi key on QRC sheet] If required, enter the password for your Wi-Fi network.The key will be displayed on the QR card.4. Click [Ok] to confirm your settings.NOTEWhen the printer is in a Windows domain network, enter the domain name in OcéExpress WebTools:- Open the [Configuration] - [Connectivity] tab- Go to the [Network adapter] section. Enter the domain name in the field [Primary DNSsuffix].Configure Océ Express WebTools settings for a mobile connectionChapter 3 - Define your Workflow with Océ Express WebTools 139
