How to feed an originalIntroductionWhen you want to copy or scan, it is important to correctly feed the original in the printer.IMPORTANT• The scanner can not scan an original that is thicker than 0.8 mm or rigid originals. When youuse the carrier sheet that is available as an option, ensure that the combined thickness of boththe document and carrier sheet does not exceed 0.8 mm. For more information, seeHow touse the carrier sheet on page 146.• Do not retrieve the original from the printer when it is already fed into the scanner. To releasethe original press the stop button on the user panel and tap [Release the original] under theSmart Access.Procedure1. Feed the original face up and centered on the original feeding table.2. The scanner takes the original.The width of the original is automatically detected and displayed in the Smart Access. The livescan view displays the scanning process.ResultDepending on the selected [Original release mode] in Océ Express WebTools, the scanner holdsor releases the original after the scan procedure. Tap [Release the original] under the SmartAccess to let the scanner release the document.When the original is released, you can feed the next original.How to feed an original144 Chapter 4 - Use the Printing System