Use offline folding (manual fold)IntroductionAn important feature of the Océ PlotWave folder is offline folding, also known as manual folding.Create a template in Océ Express WebTools and enable offline folding on the user panel to useoffline folding with the Océ PlotWave 450/550.NOTE• Use offline folding only for the sheets that do not exceed a maximum length of 6m, otherwisean error occurs.• You can only fold paper. When you try to fold polyester, transparent or vellum media, a mediajam will occur.Procedure1. On the printer's user panel, open the system menu.2. Select [Offline folding], follow the wizard and select a template to enable offline folding.3. Check the status of the folder light. Make sure the light is on.When the light is ThenOff The printer is online and off-line folding is not possible.Blinks slowly The printer is offline but the folder is still processing the last prints.Blinks rapidly An error has occurredOn The printer is offline and you can insert the paper.For more information, see the label on the top cover of the folder.4. Feed the sheet of paper short edge, face down and with the legend on the side of the folder's LEDlight.NOTEWhen you want to insert another sheet, make sure the folder light does not blink. Amedia jam can occur.5. Collect your output.ResultDepending on the output length your delivery destination can differ.After you finishWhen you want to disable offline folding:1. On the printer's user panel, open the system menu.2. Select [Offline folding], follow the wizard to disable offline folding.Use offline folding (manual fold)222 Chapter 5 - Use the Folder