Load a media rollIntroductionYou can load standard and custom media on your printer.Before you beginBefore you load a roll on the printer, make sure your media has been configured.• For standard media you can configure and enable a media profile in Océ Express WebTools.For more information, seeConfigure the media profiles on page 195.• Make sure the size is configured and enabled in Océ Express WebTools. For more information,seeConfigure the media sizes on page 198. If your media size is not present in the list, you cancreate a custom media size. For more information, seeCreate a custom media size onpage 197.IMPORTANT• Do not use dented media rolls to prevent damage to the imaging devices.• Do not open the media drawer during the print process.• Do not open more than one media drawer at the same time to prevent overbalance of theprinter.CAUTIONWatch your fingers when you handle the media roll.Procedure1. Pull firmly to open the media drawer.2. Place the new media roll on the roll loading station.3. Pull (1) the handle of the roll holder locking mechanism toward you.Slide (2) the roll holder into the right side of the core of the new media roll.Load a media roll292 Chapter 5 - Maintain the Printing System
