Loading a CassetteMastering the Basics10E1. Make sure that you have inserted a power source.2. Slide the EJECT 55 button upwards to release the cover (thecamera’s grip).• Pull the cover fully open (while holding the button upwards) and wait acouple of seconds for the cassette compartment to open automatically.3. Load or unload the cassette.• Insert the cassette gently with the window facing out.• Remove the cassette by pulling it straight out.4. Press the mark on the compartment until it clicks, and waitfor it to close.5. Click the cover back into place.PUSHOPEN/EJECTPUSHPUSHLoading and unloadingUse videocassettes marked with the logo only.*MiniNotes:• After loading a cassette, use record search (p. 34) to find the point where youwant to start recording.• Do not interfere with the cassette compartment while it is opening or closingautomatically, or attempt to close the cover.• Do not leave the cassette in the camera after use — return it to its case andstore it in a cool, clean, dry place.• The holes in the back of the cassette are used for transferring information — donot cover them.* is a trade mark.Mini