Canon Optura Instruction Manual

Also see for Optura: Instruction manual

Contents

Canon Optura Instruction Manual Manual pdf 51 page image

51E Using the FullRange of FeaturesEditing to a VCRS-VIDEO OUTVIDEOS-VIDEOINPUTAUDIOLRVIDEO/AUDIO OUTREMOTE1. Find a point on your recorded cassette slightly ahead of the sectionyou want to copy.2. Start to play it back while you monitor the picture on the TV.3. Start recording on the VCR as soon as the section you want to copyappears on the screen.4. Pause the VCR at the end of the section you want to copy, then stopplayback on the camera.5. Repeat steps 1 to 4 until your edited recording is complete.By connecting the camera to another VCR, you can edit your recordings in orderto remove unwanted scenes — or combine different shots to create your ownvideo productions.1. Connect the camera to the VCR.• See “Connections for Playback on a TV screen” on p. 19.2. Prepare the TV and VCR.• Turn on the TV and set it to the video channel, or set the TV/VIDEOselector to VIDEO.• Turn on the VCR, and set its input selector to LINE. Load a blank cassette,and put the VCR in record pause mode.• See your TV and VCR instruction manuals for details.3. Slide the camera’s POWER switch to VCR, and load your recordedcassette.PreparationsBasic RecordingNote:• The quality of the edited tape will be slightly lower than that of the original.Playback the tape onthe camcorder.Record the scenesyou want on theVCR.