Canon Optura Instruction Manual

Also see for Optura: Instruction manual

Contents

Canon Optura Instruction Manual Manual pdf 15 page image

Mastering the Basics15EUsing the LCD ScreenYou can choose between using the LCD screen and the viewfinder by pressing theMONITOR/FINDER button.Switching between displaysYou can choose the angle of thescreen that suits you best by tilting ittowards you.Changing the angle of the LCD screen100°Notes:• Avoid touching the LCD screen.• Do not hold the camcorder by the LCD panel.• Bright light falling on the LCD screen may cause glare that makes it difficultfor you to view the image. In this case, switch to using the viewfinder.• When you turn on the camera, the display always appears on the LCD screen inVCR mode.The display may appear in the viewfinder in camera mode, if you were usingthe viewfinder when the camera was turned off.About the LCD Viewfinder/ScreenLiquid Crystal Viewfinders use extremely high-precision technology, but therewill be pixels which do not light up or which are continuously lit. This is not anerror and will not affect the recording.The camcorder has a built-in speaker so you can review the sound track alongsidethe picture during playback.Adjust the speaker volume by choosing VOLUME at the VCR menu, and settingthe volume to HIGH, MEDIUM or LOW. Turn the speaker off completely byselecting OFF.Built-in speakerVOLUME••••••MEDIUM(For an explanation of how to use thecamera menu see page 25)(see p. 25)Note:• The speaker turns off when the camera is set to camera mode and when you useheadphones.• You cannot adjust the volume of attached headphones.