Canon PIXMA MP460 User Manual

Contents

116 Chapter 11Troubleshooting “There is not enough memory.” Message Is Displayed Scanned Image Is Not Displayed Properly Trouble scanning with MP Navigator Image position and size incorrect when scanning from the machine’soperation panelCause ActionThere is not enough memory tocontinue scanning.Exit any applications that are running, and try to run this program again.Cause ActionScanned image prints out enlarged(reduced).Set the printing size in the application program.Example: ArcSoft PhotoStudio1. With the image in the selected state, click the [File] menu and select[Print].2. Move the print size slider left or right in the Print dialog to adjust theprinting size. The preview image to the left will change size accordingly.Scanned image enlarged (reduced)on the computer monitor. z Change the display setting in the application software.z It may not be possible to reduce the size of images opened in the Paintor Imaging programs. Open the image in an application programsupplied with the machine instead. See the on-screen manuals for eachapplication program for the detailed procedures.z Change the resolution setting in the scanner driver and rescan. Thehigher the resolution, the larger the resulting image will be.z Some application programs do not display clear images at small imagedisplay settings. Set the scale to 100%.Scanned image won't open. The file name extension is not supported by the application program.Rescan the image using an application program, such as ArcSoftPhotoStudio, and change the file name extension when saving the image.See the on-screen manuals for each application program for the detailedprocedures.Cause ActionThe original may not be scannedcorrectly when [Document Size] isset to [Auto Detect].Set the [Document Size] to the actual size of the original, and scan it again.If the size you need cannot be set, scan to a larger size and trim it. Formore information, refer to the Scanning Guide.Cause ActionMP Navigator settings do not matchthe originals.Set the MP Navigator [Document Type] and [Document Size] to matchthose of the originals being scanned. For more information, refer to theScanning Guide.