96 Chapter 10Routine Maintenance4 Start Bottom Plate Cleaning.(1) Display the Maintenance screen.(2) Use [ ] or [ ] to select , then press [OK].(3) When the confirmation message is displayed, select and press [OK].The paper is ejected.Inspect the discharged paper. If dust or dirt can be seen on the paper, repeat the cleaningprocess. Cleaning The Protrusions Inside The MachineIf the protrusions inside the machine are stained, wipe ink off the protrusions using a swab orsomething similar.Note If the discharged paper still appears dirty after you have run this Cleaningprocess, the inside of your machine is probably extremely dirty.Clean the inside of the machine in accordance with the followingdirections.See “Cleaning The Protrusions Inside The Machine” on page 96.Important Before cleaning, be sure to turn OFF the machine.Caution Do not touch the transparent film (A), film cable (B), ink absorber (spongepart) (C), or any metal parts.(A) (B) (C)
