BAC123BASet Printer IP Address Screen is DisplayedSelect Use next IP address (B).Enter the value you want to specify for each of IP Address, Subnet Mask, andDefault Gateway or Router (C).Click Connect (A).Make sure that you follow "Connection Checklist" onpage 11, then click Connect (A).Check 1Check 2Turn off the access point, turn it back on, then clickConnect (A).Check 4If the problem is not solved even after following Check 1 to 3, follow the procedurebelow to specify the IP address.When obtaining an IP address automatically, make sure that the DHCP function of theaccess point is active.For details on how to check the settings of the access point, refer to the manual supplied with theaccess point or contact its manufacturer.•Enable the DHCP function of the access point, then click Connect (A).For details on how to change the settings of the access point, refer to the manual supplied withthe access point or contact its manufacturer.•Check 3CheckCheck Settings Screen is DisplayedThe screen appears when an IP address was notobtained automatically due to incorrect network key orinactive DHCP function.Make sure that the DHCP function of the access point is active.For details on how to check the settings of the access point, refer to the manual supplied with theaccess point or contact its manufacturer.•For details on how to change the settings of the access point, refer to the manual supplied withthe access point or contact its manufacturer.•If the DHCP function is inactive, enable the DHCP function of the access point orspecify the IP address of the machine, then click Connect (A).DHCP function•A function to automatically assign required information (IP address, etc.) to computers, printers or otherdevices connected to the network.IP address•A numerical identification assigned to each computer or network device connected to a network.Check 1Check 2If the network key is incorrect, enter the network keyagain and click Connect (A).For details on how to check the network key of the accesspoint, refer to the manual supplied with the access point orcontact its manufacturer.•To specify the IP address of the machine, click Set IP Address (B), then follow the procedure inCheck 4 of "Set Printer IP Address Screen is Displayed" on page 4.•Network Key•A password required to set to prevent unauthorized access to communication.CheckGlossary