Canon PIXMA iP2000 Quick Start Manual

Also see for PIXMA iP2000 Series: Supplementary guide Simplified service manual Quick start guide Start here

Contents

Troubleshooting70Problem Possible Cause Try ThisHave you replacedink tank with a newone? message isdisplayedIf the ink tank hasbeen replaced witha new oneClick Yes to reset the ink counter.See "Resetting the Ink Counter" on page 56.If the Front Coverhas been open for acertain period (theink tank has notbeen replaced)Click No or Cancel on the dialog box described above.You can choose the option to disable the diaplay of this confirmation message.1. Ensure that the printer is turned on and open the PPrinter Properties dialogbox.2. Click the MMaintenance tab and then click LLow Ink Warning Setting.3. Clear a check box of DDiaplay a confirmation message of ink tank replacementand click Send.Low Ink WarningAccompanied by InkTank Icon With '?'Failure to reset inkcounter wheninstalling new inktankThe ink tank level accompanied by the ink tank icon with the “?” indicates inktank is not synchronized with its ink counter.Always be sure to reset the ink counter in your printer driver when you replaceink tank. See "RResetting the Ink Counter" on page 56.A “?” is displayed next to the Ink counter between the time one ink tank isremoved and the ink counter is reset when the next one is installed. Display ofthe “?” can be disabled by unchecking the DDisplay low Ink Warning check box.1. Open the PPrinter Properties dialog box.2. Click the MMaintenance tab and then click LLow Ink Warning Setting icon.3. Clear a check box of DDisplay low ink warning off and click SSend.If you do not want to display the remaining ink level in the IInk Level Information,clear a check box of Display the remaining ink level.1. Select AApplications from the GGo menu.2. Double-click the PPrinter Setup Utility icon in the UUtilities folder.If you are using the OS other than Mac OS X v.10.3, double-click the PPrintCenter icon.3. Select iiP2000 from the NName List and click UUtility or CConfigure.4. Select iiP2000 from the PProduct list and click MMaintenance.5. Select RRemaining ink Level setting from the pop-up menu.6. Click RRemaining Ink Level Indicator Setting icon.7. Clear a check box of DDisplay the remaining ink Level and click SSend.