49123456789CoverPreliminary Notes andLegal InformationContents:Basic OperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesP ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuidePlayback ModeStill Images MoviesShooting with Color AccentChoose a single image color to keep and change other colors to black and white.1 Choose [T].z Follow steps 1 – 2 in “Specific Scenes”(=45) and choose [T].2 Access the setting screen.z Press the <p> button.X The original image and the Color Accentimage are displayed one after another.X By default, green is the color that will bekept.3 Specify the color.z Position the center frame over the colorto keep, and then press the <q> button.X The specified color is recorded.4 Specify the range of colors tokeep.z Press the <o><p> buttons to adjust therange.z To keep only your specified color, choosea large negative value. To keep colorssimilar to your specified color as well,choose a large positive value.z Press the <m> button to return to theshooting screen.5 Shoot.Recorded Color• Using the flash in this mode may cause unexpected results.• In some shooting scenes, images may look grainy and colors maynot look as expected.Still Images MoviesShooting with Color SwapYou can replace one image color with another before shooting. Note thatonly one color can be replaced.1 Choose [Y].z Follow steps 1 – 2 in “Specific Scenes”(=45) and choose [Y].2 Access the setting screen.z Press the <p> button.X The original image and the Color Swapimage are displayed one after another.X By default, green will be replaced withgray.3 Specify the color to replace.z Position the center frame over the colorto replace, and then press the <q>button.X The specified color is recorded.
