69MacintoshDownloading Images to a ComputerThis topic briefly explains how to use ImageBrowser to perform a range of operationsfrom downloading the camera’s images to printing them.• For a more detailed explanation, please see the ImageBrowser Help menuor PDF manual, ImageBrowser Software User Guide (p. 4).If the Continue Connection Confirmation Message Displays• When a connection is open between the camera and computer via the USBinterface and the camera is not accessed for approximately 5 minutes, theconfirmation message will display. If you do not do anything, the camera willdisconnect after approximately 1minute. (The message will not appear and thecamera will not disconnect if the camera is powered from a household powersource.)Press the camera’s shutter button or main switch to reconnect. Please see the CameraUser Guide for more information.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○Starting ImageBrowserUSB Port Connection1. Attach the supplied USB cable to the computer’s USB port and thecamera’s Digital Terminal, and set the camera to Replay mode.• For USB interface connection instructions, see “Connecting to a USB Port” (p. 16).• ImageBrowser will start and open the ImageBrowser Automation Wizarddialog.2. Confirm that [Display Images] is selected and click the [OK] button.Confirm that thisoption is selected.The Communications Settings dialog will display. This dialog only appearsthe first time the camera is connected.
