55Projecting an ImageSelecting Screen Aspect and AspectSelect an optimum aspect ratio of the projecting image (screen aspect) or an optimumscreen mode (aspect) according to the aspect ratio of the screen, type of input imagesignal and so on for the projection making best use of the screen size.• [Screen aspect]: Select the same aspect ratio as that of the screen in use.• [Aspect]: Select [Auto] unless the type of input signal is [VIDEO].You may need to change the setting depending on the resolution of the computer. If theimage is not projected with a desired aspect ratio, see "Relationship between Aspect andScreen Aspect" in Appendix on page 131.Selecting Screen AspectSelect the aspect ratio of projecting image to the aspect ratio of the screen.Perform the following steps to select the aspect ratio of the projecting image.1 Press the MENU button to display a menu window.2 Use [<] / [>] to select the [Display settings] tab.3 Select [Screen aspect] with [ ] / [ ], and then press the OK button.Remote control Top controlRemote control Top control<<Remote control Top control
