73Setting Up Functions from MenusSetting Display StatusSelecting an Image Projection Mode[Aspect]You can select a projection mode corre-sponding to the aspect ratio of image.• Different contents are displayed for dif-ferent screen aspects or input signaltypes.• The ASPECT button on the remote con-trol can also be used to select theAspect settings.Press the OK button to accept your settingand then press the MENU button.HDMI COMPONENTDIGITAL PC VIDEO/S-VIDEOANALOG PC USBAuto An image is projected at an aspectratio of the input signal. Select thismode for normal image projection.4:3 An image is projected at an aspectratio of 4:3. Select this to projectcomputer screen images having aresolution lower than SXGA+ (VGA,SVGA or XGA) over the entire screen.16:9 An image is projected at an aspectratio of 16:9. Select this when visualsoftware having aspect ration or 16:9cannot be correctly projected in theAuto mode.AspectDisplay settingsZoom An image with 4:3 aspect ratio is pro-jected in the center of the screenenlarged in 16:9 aspect ratio with theupper and lower portion of the imagecut off. Select this when projectingvisual software having aspect ratio of4:3 and black belts at the top andbottom of the image.• When you select [16:9] or[16:9 Dimage shift] for [Screen aspect],[Zoom] appears if the type of inputsignal is [HDMI], [COMPONENT],[VIDEO], or [S-VIDEO].True size An image is projected with the origi-nal resolution of the input signal.Select this to clearly project com-puter screen images having a resolu-tion SXGA+ or lower (VGA, SVGA,XGA or SXGA) or visual software hav-ing a resolution lower than 1035i.• This mode is available when youselect [ANALOG PC-1], [ANALOGPC-2], [DIGITAL PC], [HDMI(720p, 576p, 480p)] or [COMPO-NENT (720p, 576p, 480p)] forinput signal.• It is not available for an image hav-ing a resolution higher thanSXGA+ or visual software having aresolution of 1080i, 1080p, 1035i,576i or 480i.• [Auto] and [True size] are not availableif the input signal type is [VIDEO].• [Auto] is automatically selected if theinput signal type is [USB].
