4.1.2 If EEPROM settings adjustment is necessaryWhen replacing the logic board, depending on the waste-ink counter value, it may benecessary to replace the ink absorber at the same time.Refer to the table below.Waste-ink counter value 0~7 7~25 25~50 50~75 75~100S900 / S820 Waste-ink Waste-ink Waste-ink Waste-ink Waste-inkcounter counter counter counter counterclear set (25%) set (50%) set (75%) clearandreplaceink absorberS750 / S520 Waste-ink Waste-inkcounter counterclear clear ← ← ←andreplaceink absorber2-21S900 / S820 / S750 / S520 Part 2: Troubleshooting TroubleshootingTable 2-2 EEPROM SETTINGS WHEN REPLACING THE INK ABSORBER
