5. TRANSPORTING THE PRINTERThe procedure for transporting the printer after completing repairs is described below.5.1 Procedure(1) Mount the print head on the carriage.(2) Turn off the printer so that the carriage locks at the home position.If the print head is not fitted on the carriage, the ink may dry and harden.For this reason, leave the head mounted on the carriage even whiletransporting the printer.Also, if the carriage is not locked at the home position, it will move whilethe printer is being transported, which may strain the paper feed encoderfilm.If you especially wish to transport the head by itself:1. Install all the ink tanks (to prevent the inside of the nozzles drying out).2. Place orange protective tape over the print head section.(to prevent possible damage to the print head section by shock etc.)2-27S900 / S820 / S750 / S520 Part 2: Troubleshooting Troubleshooting
