22Printing Maintenance2. From an application FileFileFileFile menu, clickPage SetupPage SetupPage SetupPage Setup.3. Click UtilitiesUtilitiesUtilitiesUtilities. The Canon S750Printer Utility window will appear.4. Select Test PrintTest PrintTest PrintTest Print from the drop-downmenu.5. Click the Nozzle CheckNozzle CheckNozzle CheckNozzle Check button. Whenprompted, click OKOKOKOK. The nozzle testpattern will print.6. When done, click CloseCloseCloseClose.7. Examine the printed nozzle check pattern to verify that the ink is consistent onthe printout.If indicated by the printout, clean the printhead (see below), orrealign it (see “Aligning the Printhead” on page 23).Cleaning the PrintheadCleaning the PrintheadCleaning the PrintheadCleaning the PrintheadIf your printed output or nozzle check pattern appears faded, streaked or scratchy,the printhead may need to be cleaned or aligned. Printhead cleaning consumesink. Avoid unnecessary cleaning.To clean the printhead in Windows:To clean the printhead in Windows:To clean the printhead in Windows:To clean the printhead in Windows:1. With the printer on, click StartStartStartStart, then SettingsSettingsSettingsSettings, then PrintersPrintersPrintersPrinters.For Windows XP, clickStartStartStartStart, then ControlControlControlControlPanelPanelPanelPanel, then Printers andPrinters andPrinters andPrinters andOther HardwareOther HardwareOther HardwareOther Hardware, thenPrinters and FaxesPrinters and FaxesPrinters and FaxesPrinters and Faxes. TheMaintenance tab mayvary for Windows NT4.0, Windows 2000 andWindows XP.2. Right-click the Canon S750Canon S750Canon S750Canon S750 printericon, then click PropertiesPropertiesPropertiesProperties.