112SETTING UP FUNCTIONS FROM MENUSSkip the POWER Button Operation[Direct power on]You can set the projector to be turned on whenyou connect the power cord.TTPress the [OK] button to confirm, and then pressthe [MENU] button.Enabling/Disabling the Beep[Beep]You can enable/disable the beep when youpress a button on the top control or remote con-trol.TTPress the [OK] button to confirm, and then pressthe [MENU] button.System settingsDirect power onDisables the direct power on func-tion.Enables the direct power on func-tion.z Wait at least 5 minutes before turningon the projector when you turn off theprojector with the direct power onfunction. It may shorten the lamp life ifyou turn on the projector immediatelyafter turning it off.z Set the previous [Power managementmode] to [Standby] or [Exit] in addi-tion to this setting if you want toenable the direct power on function.DIGITAL PC ANALOG PCDIGITAL VIDEO COMP./SCART VIDEO/S-VIDEOOffOnSystem settingsBeepDisables the beep.Enables the beep.z It does not beep if you mute the pro-jector sound temporarily with the[MUTE] button.DIGITAL PC ANALOG PCDIGITAL VIDEO COMP./SCART VIDEO/S-VIDEOOffOn
