51PROJECTING AN IMAGE FROM THE COMPUTERAdjusting the FocusYou can adjust the focus.Follow the steps below to adjust the focus manually if the Auto setup function (Auto focus)does not adjust the focus appropriately.1 Press the [FOCUS] button.The Focus adjustment window appears.2 Press the POINTER buttons to adjust the focus.3 Press the [OK] button.z You can activate the Auto focus function if you press the [AUTO SET] button now.However, if you select [16:9 D. image shift] for [Screen aspect], the auto focus functionwill be disabled.z The projected image may be out of focus if the projection distance is beyond the range of1.2 m (3.9') to 9 m (29.5'). Move the projector installation position if such is the case (P32).Rough adjustment: [ ] [ ]Fine adjustment : [<] [>]<<
