44PROJECTING AN IMAGE FROM THE COMPUTERPreparing the ComputerDetermining the Output Resolution of the ComputerTo make the most of the display performance of this projector, set output signal resolutionof the computer to an optimum value.Windows 71. Open the [Control Panel] from the startmenu, then select [Appearance and Per-sonalization] – [Adjust screen resolution] inthe [Control Panel Home].2. Click the [Resolution] pull-down menu andmove the slider to select "1400 x 1050"("1024 x 768" for X700). If this resolution isnot available, select the highest resolutionunder 1400 x 1050 (under 1024 x 768 forX700).3. Click the [OK] button.Windows Vista1. Open the [Control Panel] from the startmenu, then select [Appearance and Per-sonalization] – [Adjust screen resolution] inthe [Control Panel Home].2. Select "1400 x 1050 pixels" ("1024 x 768 pix-els" for X700) or a resolution closest to theoutput signal resolution of the computer.3. Click the [OK] button.Windows XP1. Right-click on the desktop background andselect [Properties] to open the [DisplayProperties].2. Click the [Settings] tab, and under [ScreenResolution], select "1400 x 1050 pixels"("1024 x 768 pixels" for X700) or a resolutionclosest to the output signal resolution of thecomputer.3. Click the [OK] button.
