Canon SmartBase MPC190 Quick Reference Manual

Contents

Chapter 6 Scanning—Basic operation 6-56-56-56-5Scanning—Basic operation6666Using the [Scan] key on the operation panelUsing the [Scan] key on the operation panelUsing the [Scan] key on the operation panelUsing the [Scan] key on the operation panelYou can assign a scan action to the [Scan] key on the operation panel so that you onlyhave to press this key to perform the action. For example, you can set it to display thetoolbar, or to perform one of the actions of the Toolbar scan buttons.Follow this procedure to select an action for the [Scan] key on the operation panel:PPPP More informationMore informationMore informationMore informationFor detailed information on all scanning features, refer to the online help or theSoftware Guide.1111 On the Windows desktop, on the MultiPASS Toolbar, click [Settings].On the Windows desktop, on the MultiPASS Toolbar, click [Settings].On the Windows desktop, on the MultiPASS Toolbar, click [Settings].On the Windows desktop, on the MultiPASS Toolbar, click [Settings].2222 In When Scanner Push Button pressed, selectIn When Scanner Push Button pressed, selectIn When Scanner Push Button pressed, selectIn When Scanner Push Button pressed, selectthe desired action that will occur when youthe desired action that will occur when youthe desired action that will occur when youthe desired action that will occur when youpress the [Scan] key on the operation panel.press the [Scan] key on the operation panel.press the [Scan] key on the operation panel.press the [Scan] key on the operation panel.3333 Click [OK].Click [OK].Click [OK].Click [OK].