Canon TR7660 Online Manual

Also see for Pixma TR7600 Series: Getting started Getting started Online manual Getting started Getting started

Changing Paper SettingsThis printer prints received faxes to paper loaded in the printer beforehand. You can use the operation panelto change the paper settings for printing faxes. Make sure that the settings are appropriate for the loadedpaper.Important• If the size of loaded paper is different from that specified in the paper size setting, the received faxesare stored in the printer's memory and Check the page size and tap [OK]. is displayed on the touchscreen. In this case, load the same size of paper as that specified in the paper size setting, and thenselect OK.You can also press the Stop button to close the message and print the stored documents in theprinter's memory later.Printing Document in Printer's Memory• If no paper is loaded, or paper has run out while printing is in progress, the received faxes are stored inthe printer's memory and the error message for no paper is displayed on the touch screen. In this case,load paper and select OK.You can also press the Stop button to close the message and print the stored documents in theprinter's memory later.Printing Document in Printer's MemoryNote• If the sender sends a document that is larger than Letter-size or Legal-size, such as 11 x 17 inches, thesender's device may send the fax automatically reduced in size or divided, or send only a part of theoriginal.1. Check that printer is turned on.2. Select FAX on the HOME screen.Using Touch ScreenThe Fax standby screen is displayed.3. Select Function list.The Function list screen is displayed.4. Select Fax paper settings.The Fax paper settings screen is displayed.5. Specify settings.419