Canon TR7660 Online Manual

Also see for Pixma TR7600 Series: Getting started Getting started Online manual Getting started Getting started

Loading Plain Paper / Photo Paper in Rear TrayYou can load plain paper or photo paper.You can also load envelopes on the rear tray.Loading Envelopes in Rear TrayImportant• If you cut plain paper to a size of 5" x 7" (13 x 18 cm) or smaller to perform a trial print, it may cause apaper jam.Note• We recommend Canon genuine photo paper for printing photos.For details on the Canon genuine paper, see Supported Media Types.• You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office ColourPaper SAT213.For the page size and paper weight you can use for this printer, see Supported Media Types.1. Prepare paper.Align the edges of paper. If paper is curled, flatten it.Note• Align the edges of paper neatly before loading. Loading paper without aligning the edges maycause paper jams.• If paper is curled, hold the curled corners and gently bend them in the opposite direction until thepaper becomes completely flat.For details on how to flatten curled paper, see Check3 in Paper Is Smudged / Printed Surface IsScratched.• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at atime as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paperand reduce the print quality.2. Open rear tray cover (A). Pull straight up and fold back paper support (B).76