Canon TR7660 Online Manual

Also see for Pixma TR7600 Series: Getting started Getting started Online manual Getting started Getting started

Important• If a power failure occurs or you unplug the power cord, all the faxes stored in the printer'smemory are deleted.• Replace the receiver.The handset is not placed in the handset cradle correctly.Replace the handset correctly.Note• See A Message for Faxing Is Displayed on Fax Standby Screen for the message displayed on the faxstandby screen.Error Regarding Automatic Duplex Printing Is DisplayedCheck See Automatic Duplex Printing Problems and take the appropriate action.Error Regarding Power Cord Being Unplugged Is Displayed (Windows)The printer may have been unplugged while it was on.Check the error message that appears on the computer and click OK.The printer starts printing.See Unplugging the Printer to unplug the printer correctly.Important• If you unplug the power cord, all the faxes stored in the printer's memory are deleted.Writing Error/Output Error/Communication Error (Windows)Check1 If the ON lamp is off, make sure printer is plugged in and turn on.The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit.Check2 Make sure printer is properly connected to computer.If you are using a USB cable, make sure it is securely connected to both the printer and the computer. Whenthe USB cable is securely plugged in, check the following:• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to thecomputer, and retry the printing. If printing starts normally, there is a problem with the relay device.Contact the vendor of the relay device.• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.If you use the printer over a LAN, make sure the printer is correctly set up for network use.Check3 Make sure MP Drivers are installed correctly.513