6-17Using the Picture Recording FunctionDisplaying Logs According to Selection CriteriaLogs can be filtered according to type, code, or date and time so that only the required informationis displayed.○ ○ ○ ○ ○ ○To Make Settings...1. Choose Filter from the View menu.2. The Filter dialog box appears.To display only the logs that match the specifiedcriteria, enter the criteria below and click the “OK”button. If no changes are required, click the “Cancel”button.●Specify TaskSelect if filtering by task name, then enter the task name.●Specify ServerSelect if filtering by server name, then enter the servername.●Error TypeSpecify the error type when filtering by error type.“Not Specified”Selecting this item disables priority and code settings.“Specify Priority”From Error, Warning, or Information, select the error level to be displayed.“Specify Code”Select if only logs with the corresponding identification code are to be displayed, then enter theidentification code.●Date & TimeFilters logs by output date and time.“Specify Start Date & Time”When this item is selected and a date and time is entered, logs generated after the specifiedstart date and time are displayed.“Specify End Date & Time”When this item is selected and a date and time is entered, logs generated before the specifiedend date and time are displayed.Viewing Recorded Pictures
