4-103. When capturing ends and the picture issatisfactory, click the “OK” button.Panorama creation can be discarded, or the AE lockposition or backlight adjustment settings can bechanged by clicking the “Cancel” button. When clicked,the captured picture is discarded and the initial screenreturns.To capture the picture again, click “Recapture” button.Or, a square section in the displayed grid can becaptured again by double-clicking on that section.Panorama Creation ToolUpdating/Deleting Panorama PicturesWhen capturing ends, the panorama picture is reflected when it is sent to the VB-C10/VB-C10Rand loaded.○ ○ ○ ○ ○ ○To Update...Click the “Update Panorama Image” button. Orchoose “Update Panorama Image” from theServer menu.When the panorama picture is updated, the VB-C10/VB-C10R automatically restarts and the connection withVB Administration Tools is cut. A dialog box asking whetheror not to reconnect to the VB-C10/VB-C10R appears afterthe VB-C10/VB-C10R restarts. When the “OK” button isclicked, reconnection ocucurs. You can exit PanoramaCreation Tool while still connected or without reconnectingto the VB-C10/VB-C10R.○ ○ ○ ○ ○ ○To Delete...Click the “Remove image” button, and then the“Update Panorama Image” button.The panorama picture saved in the VB-C10/VB-C10R isdeleted.
