3-12Detail Settings“Home Position”Specify the camera settings to be used at startup. ThePan, Tilt, and Zoom settings are valid when “Return toHome Position when nobody has a control privilege” isenabled.“Pan”Sets the pan position for the camera.“Tilt”Sets the tilt position for the camera.“Zoom”Sets the value for the camera’s angle of zoom.“Brightness”Sets the target value for the camera’s auto exposurefeature. Select “Brighter” if the picture is darker dueto backlight or other factor.“Shutter Speed”Sets the camera shutter speed. Select Auto, 1/60 or1/100.“Focus Mode”Sets the focusing mode for the camera.Select “Auto”, “Auto (for domes)”, or “Fixed at infinity”.When the VB-C10/VB-C10R is used with an outdoorhousing, focusing on the wall of the outdoor housingcan be avoided if the Focus mode is set to “Auto (fordomes)”.“View Restriction”If you tick the “Apply view restriction” option, the settingsbelow are enabled. Use this setting to prevent clientsfrom seeing certain camera angles. View restrictionsare conveniently set using VB Administration Tools(→ P.4-12).“Upper value, Lower value, Left value, Right value”Sets the visible range to be provided to the user.*Set the values so that Upper value > Lower value,and Left value < Right value.“Telephoto, Wide-angle”Sets the zoom angles provided to users.*Set the values so that the Telephoto <= Wide-angle.NoteView restrictions can be set visually and more easily from the VB AdministrationTools. Please use the VB Administration Tools for making settings (→ P.4-12).Click the “OK” button to change the settings. To discard the changes, click the “Cancel”button. This returns you to the settings title page.
