| 
10-2You can configure the way the Viewer starts up, forexample, to have it bypass the login screen with the username and password (P. 3-3, P. 3-4) by creating a shortcuticon that specifies Viewer startup options.[Viewer.exe] is located in the following folder bydefault::\Program Files\Canon\WebView\NVRA dialog box asking whether to create a shortcut onthe desktop is displayed.Note corresponds to the drive containing the systemfiles of the operating system. If the operating system is installedon the C drive, the system drive is the C drive.For example, if you want to create a shortcut iconspecifying the user name and password, as well as thestorage server to connect to, use the following startupoption:"C:\Program Files\Canon\WebView\NVR30\Viewer.exe" -group nvr://admin:NVR@192.168.100.1:80About the Latest Camera FirmwareYou can find the latest firmware and configuration backupand restore tools for cameras that are supported by thisprogram at the Canon Web site.Update the FirmwareTo update the firmware for your camera, you must use thetool that is specific to your camera model.NoteIf the firmware update fails, restore the configuration using theconfiguration restore tool.Create a Shortcut Icon for Starting the ViewerImportant• You cannot reconfigure the shortcut icon that is automaticallycreated on your desktop when you install this software.• The login password can be easily viewed in the properties ofthe shortcut icon. Make sure to take sufficient securitymeasures when using this feature.1 Right-click [Viewer.exe] in the installation folder andclick [Create shortcut].2 Click [OK].3 Right-click the shortcut icon that was created on thedesktop and select [Properties].4 On the [Shortcut] tab, add a startup option to [Target].Startup Options Description-group nvr://:@<storage server group name>The information in the optionsis used to connect to theserver group and start theViewer, without displaying the[Connect to Storage ServerGroup] dialog box on startup.5 Click [OK] to close the dialog box.Camera Maintenance1 Download the latest firmware with the firmware updatetool, and download the configuration backup andrestore tools.2 Back up the camera configuration using theconfiguration backup tool.3 Update the firmware using the firmware update tool. |
