Canon VC-C4 Instruction Manual

Also see for VC-C4: Pin assigments guide

Canon VC-C4 Instruction Manual Manual pdf 14 page image

Before You Use the Product14Turning the Power ON and OFFThe VC-C4/VC-C4R camera itself does not have a power switch. You can switch the camera onby plugging the AC adapter into a wall outlet. When power to the camera is switched on, theLED on the camera turns green. If the monitor is switched on, an image appears on the screen.AC cableto AC outletAC adapterCameraMonitorNOTEl Whenever you turn the power on, first press any button on the wirelesscontroller. This initializes the camera head position. Initialization takes severalseconds. During initialization, the LED on the camera flashes green (at 1-secondintervals).l Never touch the camera head during initialization as this could prevent successfulinitialization and cause faults.l Wait at least five seconds before turning the power back on after shutting it off.Turning it on too quickly may result in a malfunction. Observe the precautionsgiven in “a Safe Use of Equipment/a IMPORTANT SAFETY INSTRUCTIONS”(→ P.5–7).LED Displays and the Camera StatusLED Display Camera StatusGreen Camera is on. (→ P.21)At 0.1-sec. intervals Wireless controller button being used.Blinking green At 0.5-sec. intervals Storing or restoring a preset (→ P.20), or displayinga setting menu. (→ P.22)At 1-sec. intervals Camera head position initialization in progress.Orange Individual camera operation in progress and this camerais not selected. (→ P.30)At 0.1-sec. intervals Camera is not selected for individual operation and is beingBlinking orange controlled from the wireless controller. (→ P.30)At 0.5-sec. intervals The camera is being selected or deselected forindividual operation. (→ P.30)Red Camera is off. (→ P.21)Off Power is off.