Canon VC-C4 Instruction Manual
Also see for VC-C4: Pin assigments guide
                                    | |
Contents
| 
16Controlling the Camera from the Wireless ControllerWhile the wireless controller buttons are being used, the LED on the camera blinks green (at0.1-second intervals) (→ P.14).Changing the Camera Head Angle (pan/tilt/home position)Use the procedures below to change the camera head angle.To move the camera head left and right (pan)Press the 4 and 6 buttons.n When pointing the remote control in the direction of the cameraand using it, the image on the monitor moves in the direction ofthe arrow on the button pressed, and the camera head movesin the oppsite direction.When DIRECTION MIRROR (→ P.25) is set to ON, the camerahead moves in the direction of the arrow on the button pressed.n Holding the button down increases the speed of camera headmovement as shown below.Low speed → Medium speed → High speedTo move the camera head up and down (tilt)Press the 8 and 5 buttons.n Holding the button down increases the speed of camera headmovement as shown below.Low speed → Medium speed → High speedTo move the camera head to the Home positionPress the h button.n This moves the camera head to the center position at high speed.NOTEDo not attempt to manually change the camera head angle.If the camera head is accidentally moved, either by hand or bybeing struck by an object, always press the h button. Thedeviation from the position that the camera memorizes will becorrected and the operation will be back in order.Range of Camera Head MovementThe figures below show the range of camera head movement from a horizontal position. Thedefault range of upward movement for the VC-C4 is 30°, but the range can be set to 90°(→ P.26).170°10°90°30°100° 100°30°VC-C4 VC-C4R170°321AF654MF9870 MENUIDHOMEFnBRIGHTON SCREENSET/OK CANCELZOOMTW |
Related manuals for Canon VC-C4
manualsdatabase
Your AI-powered manual search engine