Connection Diagrams118Connection DiagramsIn the following connection diagrams, the left side shows the terminals on the camcorder and the rightside shows (for reference only) an example of terminals on a connected device.Connection A HDMIType: Digital Quality: High definition Output onlyConnect to a high-definition TV (HDTV) with an HDMI input terminal. If your HDTV supports HDMI-CEC or 1080p input, youcan activate these functions with the 6 [Control for HDMI] and [HDMI 1080p Output] settings, respectively. Youcan check the standard of the current output signal with the 6 [HDMI Status] setting.Connection B Component VideoType: Analog Quality: High Definition Output onlyConnect to a high-definition TV (HDTV) with component video input terminals. Change the following settings on thecamcorder:- 6 [AV/Headphones] to [H AV]HTC-100/S HDMI Cable(supplied)(HDMI miniconnector)(standard HDMIconnector)About the HDMI TM connectionThe HDMI (High-Definition Multimedia Interface) connection (A) is a convenient all-digitalconnection using a single cable for both video and audio. When you connect the camcorder to anHDTV equipped with an HDMI terminal, you can enjoy video and audio playback at the highestquality.- The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMIoutput terminal on an external device, as this may damage the camcorder.- While the camcorder is connected to an HDTV using connection A, there will be no videooutput from other terminals.- Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.- Depending on the HDTV, correct playback of personal video content may not be possible usingconnection A. Try one of the other connections.WhiteCTC-100 Component Cable(optional)STV-250N Stereo Video Cable(supplied)RedGreenBlueRed
