Preparing the Camcorder23Adjusting the Position and Brightness of the LCD ScreenRotating the LCD PanelOpen the LCD panel 90 degrees.• You can rotate the panel 90 degrees downward.• You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can beuseful in the following cases:- To allow the subject to monitor the LCD screen while you use the viewfinder.- To include yourself in the picture when recording with the self timer.- To allow the camcorder to be operated with the wireless controller from the front.NOTES• About the LCD and viewfinder screens: The screens are produced using extremely high-precisionmanufacturing techniques, with more than 99.99% of the pixels operating to specification. Lessthan 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. Thishas no effect on the recorded image and does not constitute a malfunction.LCD BacklightWhen recording in bright places it may be difficult to use the LCD screen. Turn on the LCD backlight tomake it brighter.With the camcorder on, hold h pressed down for morethan 2 seconds.• Repeat this action to switch the LCD backlight between off(normal) and on (bright).180°90°Subject can monitor the LCD screen(You can use the viewfinder at the same time)180°
