Video Scopes78Video ScopesThe camcorder can display a simplified waveform monitor. It can also display an edge monitor* to helpyou focus. The video scopes appear only on the LCD screen. They do not appear in the viewfinder oron an external monitor.* The edge monitor looks at the focus of the entire picture and displays the results as a waveform.Displaying the Waveform Monitor during [A Programmed AE] RecordingProgram1 Make sure the recording program is [A Programmed AE].[FUNC.] [Rec. Programs] [A Programmed AE]2 Open the exposure adjustment screen.[FUNC.] [e Exposure]3 Touch [ ] (manual adjustment) and then touch [ ] (waveform monitor).• The waveform monitor will appear in a window on the screen. Touch the window to close it.• You can adjust the exposure using the dial at the bottom of the screen or by touching inside thee frame (0 59). You can see the results immediately in the waveform monitor.Displaying the Waveform Monitor during [y Manual Exposure] RecordingProgram1 Open the [y Manual Exposure] screen.[FUNC.] [Rec. Programs] [y Manual Exposure]2 Touch [ ] (waveform monitor).• The waveform monitor will appear in a window on the screen. Touch the window to close it.• You can adjust the exposure by using the controls on the screen (0 58). You can see the resultsimmediately in the waveform monitor.Displaying the Edge Monitor1 Open the focus adjustment screen.[FUNC.] [X Focus]2 Touch [ ] (manual focus) and then touch [ ] (waveform monitor).• The edge monitor will appear at the bottom of the screen. Touch the edge monitor to close it.• You can adjust the focus using the focus dial or by touching the inside the X frame (0 46). Youcan see the results immediately in the edge monitor.Operating modes:
