Focus Adjustment48NOTES• While using autofocus, you can turn the manual ring to focus manually. When you stop turning thering, the camcorder returns to autofocus. This is useful in situations such as when focusing on asubject on the other side of a window.• When recording in bright surroundings, the camcorder closes down the aperture. This may causethe picture to appear blurred and is more noticeable toward the wide angle end of the zoom range.In such case, set 7 [ND Filter] to [O Automatic].• When you set 7 [Conversion Lens] to a setting other than [B Off], the [ Instant AF]and [ Medium AF] settings are not available.• Autofocus takes longer to focus when the frame rate is set to [o PF30], [E PF24] or[ 24P] than when it is set to [C 60i (Standard)].• When recording under dark conditions, the focusing range narrows and the picture may appearblurred.• Autofocus may not work well on the following subjects or in the following cases. In such case, focusmanually.- Reflective surfaces- Subjects with low contrast or without vertical lines- Fast moving subjects- Through dirty or wet windows- Night scenesFace DetectionThe camcorder automatically detects people’s faces and uses this information to select the optimalfocus and exposure settings.* Face detection is always activated in mode.POINTS TO CHECK• Select a recording program other than [q Night Scene], [p Low Light], [M Fireworks] or[y Manual Exposure].By default, face detection is activated. If the function was turned off, perform the following procedureto turn it on.1 Open the [Face Detection & Tracking] screen.[FUNC.] [MENU] 7 [Face Detection & Tracking]2 Touch [A On o] and then touch [a].Operating modes: *
