Wi-Fi Connection Using an Access Point1392 Within 2 minutes, touch [OK] on the camcorder’s screen.• The camcorder will connect to the access point.• You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress.• After the connection is established, continue using the function you were previously using. Fordetails, refer to the procedure in Playback on a Computer (A 130), Transferring Files to aComputer or FTP Server (A 131) or Viewing and Changing Wi-Fi Settings (A 141), asnecessary.Searching for Access PointsThe camcorder will automatically detect access points in the vicinity. After you select the desiredaccess point, you simply enter the password (encryption key) to connect the camcorder.To enter text for the various settings, use the virtual keyboard (A 132).1 Note the access point’s network name (SSID) and encryption key.2 When the detected access points appear, touch [OK].• You can touch [Í] and [Î] to go through the detected access points.3 In the [Encryption Key] field, enter the encryption key and then touch [OK].• If the access point selected in step 2 did not have a [C] icon, this step is not necessary.4 Touch [OK] twice.• After the connection is established, continue using the function you were previously using. Fordetails, refer to the procedure in Playback on a Computer (A 130), Transferring Files to aComputer or FTP Server (A 131) or Viewing and Changing Wi-Fi Settings (A 141), asnecessary.COPY
