Exposure Adjustment67To adjust the Touch AE function for highlights (Highlight AE)Certain subjects, like clouds or white objects, are easily overexposed and can end up appearing asbright areas where all detail is lost. Using the [Highlights] setting, you can touch the brightest areainside the y frame and the camcorder will automatically make corrections so that area is notoverexposed. When you touch a dark area in the picture or the highlights are too bright, thecamcorder may not be able to correctly adjust the exposure.After step 1 above:1 Touch [w].2 Touch [Highlights] and then touch [K].• Touch [Normal] to return the camcorder to normal Touch AE settings.To use backlight correctionWhen recording in situations in which the subject is constantly backlit, you can use backlightcorrection to make the entire picture brighter, especially dark areas. This will take precedence over thep > [Auto Backlight Correction] setting, which is useful in situations in which the subject is notconstantly backlit.1 Open the [° BLC Always On] screen.[FUNC.] > [° BLC Always On]2 Touch [ON] and then touch [X].• ° appears on the screen.• Alternatively, you can set an assignable button to [° BLC Always On] (A 92). In that case,press the assignable button to turn the backlight correction on and off.NOTES• The camcorder will return to automatic exposure if the camcorder is turned off, the power switch isoperated or the recording program is changed.• If you set q > [CUSTOM Dial & Button] to [y Exposure] (A 91), you can adjust the exposurecompensation value with the CUSTOM dial and button.COPY
