Saving and Loading Menu Settings94Saving and Loading Menu SettingsAfter you adjust the cinema-look filters and other settings in the FUNC. panel and setup menus, youcan save those settings on a memory card. You can load those settings at a later date or on anotherHF G30 camcorder so that you can use that camcorder in the same way.Saving Menu Settings to a Memory CardMenu settings must be saved to memory card 3. If the memory card already has menu settings on it,they will be overwritten.1 Insert a memory card into memory card slot 3.2 Open the [Backup Menu Settings 7] screen.[FUNC.] > [MENU] > q > [Backup Menu Settings 7]• Touching [FUNC.] is necessary only when performing the procedure in mode.3 Touch [Save] and then touch [Yes].• The current settings are saved to the memory card.4 Touch [OK] and then touch [X].Loading Menu Settings from a Memory Card1 Insert a memory card with menu settings into memory card slot 3.2 Open the [Backup Menu Settings 7] screen.[FUNC.] > [MENU] > q > [Backup Menu Settings 7]• Touching [FUNC.] is necessary only when performing the procedure in mode.3 Touch [Load] and then touch [Yes].• After the camcorder’s current settings are replaced with the settings saved on the memory card,the screen will turn black momentarily and the camcorder will restart.Operating modes:COPY