Wi-Fi Connection Using an Access Point140Manual SetupPerform this procedure to manually configure the wireless connection settings. This may be necessary,for example, if your access point’s network name (SSID) cannot be detected due to the stealthfunction being enabled. Manual setup is for advanced users of Wi-Fi networks.To enter text for the various settings, use the virtual keyboard (A 132).1 In the [SSID] field, enter the SSID and then touch [OK] > [Next].2 In the [Authentication/Encryption Method] field, touch [OPEN NONE] and then touch thedesired method.• If you selected [OPEN WEP], the WEP index is 1.3 In the [Encryption Key] field, enter the encryption key and then touch [OK] > [Next].• In step 2, if you selected [OPEN NONE], entering the encryption key is not necessary.4 Touch [Automatic] or [Manual] to select how to obtain the IP address.• If you selected [Automatic], proceed to step 11.5 For the [IP Address] and [Subnet Mask] fields, touch [0.0.0.0] and then touch [Í]/[Î] tochange the value and then touch [Next].• Touch the next field to change the value, as necessary.6 Touch [Next].7 In the [Default Gateway] field, touch [0.0.0.0] and then touch [Í]/[Î] to change the valueand then touch [Next].• Touch the next field to change the value, as necessary.8 Touch [Next].9 For the [Primary DNS Server] and [Secondary DNS Server] fields, touch [0.0.0.0] and thentouch [Í]/[Î] to change the value and then touch [Next].• Touch the next field to change the value, as necessary.10 Touch [Next].11 Touch [OK].• After the connection is established, continue using the function you were previously using. Fordetails, refer to the procedure in Playback on a Computer (A 130), Transferring Files to aComputer or FTP Server (A 131) or Viewing and Changing Wi-Fi Settings (A 141), asnecessary.NOTES• The Wi-Fi functions available and the setup method will vary depending on the specifications andcharacteristics of the Wi-Fi network you want to use.COPY