| 
Chapter 66-76.1.4.5 E02400/ E02401/ E02402/ E02403/ Path mismatch error0008-6509This is displayed when the loaded media is a cut sheet when the received data is designated for roll media.This is displayed when the roll media is not loaded when the received data is designated for roll media.This is displayed when the cut sheet is not loaded when the received data is designated for cut sheet.This is displayed if the loaded media is roll media when the received data is designated for cut sheet.This is displayed when printing the adjustment pattern if the loaded media is smaller than the prescribed size of the adjustment pattern.Media, engine controller, system controller1. Media checkCheck the media loading status, and reload the media if the media are different from the transmit data, the media are not loaded, or the loaded media areoutside of the prescribed size.2. Replace the engine controller.3. Replace the system controller.6.1.4.6 E02405/ E02406/ E02407/ Borderless printing error0008-6510Current media loading position is unsuitable for Borderless Printing.Data not compatible with borderless printing was received.Media with width not allowed for borderless printing is set.Printer operating procedure error.1. Check correct operating procedure and retry print operation.6.1.4.7 E02500/ E02501/ E02502/ E02503/ E02504/ E02505/ Ink empty error0008-6511This is displayed when no ink is detected in the ink tank.Ink tank, engine controller, system controller1. Replace the ink tank.2. Replace the engine controller.3. Replace the system controller.6.1.4.8 E02506/ E02507/ E02508/ E02509/ E0250A/ E0250B/ Ink tank uninstalled error (during ink tank replacement)0008-6512This is displayed when the sensor detects that the right cover is closed with an ink tank removed during ink tank replacement.Operating procedure, ink tank, right cover sensor, ink tank unit, engine controller, system controller1. Operation checkInstall the ink tank.2. Visual checkRemove any foreign objects adhering to the ink tank contacts and right coversensor.3. Replace the ink tank.4. Right cover sensorCheck operation using SERVICE MODE>I/O DISPLAY, and replace if anythingdoes not function normally.5. Cable connection checkReplace the cable between the right cover sensor and engine controller if theconnection is not functioning normally.6. Replace the ink tank unit.7. Cable connection checkReplace the cable between the ink tank unit and engine controller if the connectionis not functioning normally.8. Replace the engine controller.9. Replace the system controller.6.1.4.9 E02520/ Ink level unknown error0008-6513Even one of the colors that should be set to Stop Ink Check in the System Setup in the Main Menu may have been changed to "Yes."(When this option is set, the ink level of the corresponding color becomes "?".) |
