Chapter 88-38.3 Error Table8.3.1 Errors0008-6579*1: The codes correspond to the numbers shown on the display in the service mode.Codes in parentheses are not shown on the display when error occurs.T-8-3Code*1 StatusE02000 No roll mediaE0200A Paper width not detectedE0200B Media loading position errorE0200C Media leading edge not detectedE0200D Cut sheet trailing edge not detectedE0200E Media is too smallE0200F Media is too largeE02010 Media is skewedE02015 Cutting failureE02016 Paper became misaligned during printingE02017 Media right edge not detectedE02018 Media left edge not detectedE02019 Printer has run out of roll paper during printingE02400 Received data indicated roll media when cut sheets had been loaded.E02401 Roll media was not loaded even though the received data indicated roll mediaE02402 Cut sheets were not loaded even though the received data indicated cut sheetsE02403 Media was too small during printing of adjustment patternE02405 Invalid paper position for borderless printingE02406 Data that does not allow borderless printing has been receivedE02407 Width indicated by the received data does not match width of paperE02500 No ink (Bk)E02501 No ink (Y)E02502 No ink (M)E02503 No ink (C)E02504 No ink (PM)E02505 No ink (PC)E02506 Ink tank not installed (Bk)E02507 Ink tank not installed (Y)E02508 Ink tank not installed (M)E02509 Ink tank not installed (C)E0250A Ink tank not installed (PM)E0250B Ink tank not installed (PC)E02520 Displayed before printing when "Ink Check Off" menu is set to "Yes".E02521 Remaining ink low (Bk)E02522 Remaining ink low (Y)E02523 Remaining ink low (M)E02524 Remaining ink low (C)E02525 Remaining ink low (PM)E02526 Remaining ink low (PC)E02530 Received data does not match the Bk ink typeE02800 No headE02801 Head overheatingE02802 Incorrect head was installedE02803 Head EEPROM errorE02804 Incorrect ink tank was installed (Bk)E02805 Incorrect ink tank was installed (Y)E02806 Incorrect ink tank was installed (M)E02807 Incorrect ink tank was installed (C)