Printing the Nozzle Check PatternPrint the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.Note• When the ink has run out during printing the nozzle check pattern, the error message will appear on theLCD.A Message Is DisplayedYou need to prepare: a sheet of A4 or Letter-sized plain paper1. Make sure that the power is turned on.2. Load a sheet of A4 or Letter-sized plain paper in the cassette 1.After inserting the cassette into the printer, the paper information registration screen is displayed on theLCD. Select A4 or Letter for Size: and Plain paper for Type:, then press the OK button.Important• The cassette 2 is not available for the nozzle check pattern print procedure. Be sure to load paperin the cassette 1.3. Extend the output tray extension, then open the paper output support.4. Press the Setup button, use the or button to select Maintenance, then press the OKbutton.LCD and Operation Panel5. Use the or button to select Nozzle check, then press the OK button.The nozzle check pattern will be printed.6. Examine the nozzle check pattern.163Downloaded from ManualsPrinter.com Manuals
