Uncheck Notify when remote documents are printed on the Advanced tab, and then restartthe computer.• The bi-directional communication function is disabled and the correct printer status may not berecognized.If a client user opens the printer driver properties and then clicks OK with the Enable bidirectionalsupport check box cleared on the Ports tab, the bidirectional communication function of the printserver may also be disabled.In this case, check Enable bidirectional support check box on both the print server system and theclient system.• When you print from a client system, you cannot use Canon IJ Preview.• When the functions on the Maintenance tab cannot be set properly from a client system, they may begrayed out. In this case, change the settings from the print server.When you change the settings of the print server, you should delete the icon of the shared printerfrom the client system, and then specify the shared settings again in the client system.• If the same driver installed on the print server is also installed on the client, the network printer iconmay be created automatically.• If an error occurs when you print a document on a shared printer from a client, the error message ofthe Canon IJ status monitor is displayed on both the client and the print server. If a document isprinted out normally, the Canon IJ status monitor is displayed only on the client.306Downloaded from ManualsPrinter.com Manuals
