Make sure the printer is on and then click OK to change the printer settings.Specify Enable to turn the printer on automatically when print data is sent to it.Auto Power OffSelects the auto power-off setting.If a printer driver operation or a printer operation is not performed within the specified time, the printerturns off.Quiet Settings dialog boxWhen you click Quiet Settings, the Quiet Settings dialog box is displayed.Quiet Settings dialog box allows you to specify a setting that reduces the operating noise of the printer.Select when you wish to reduce the operating noise of the printer at night, etc.Using this function may lower the print speed.Do not use quiet modeSelect this option when you wish to use the printer with volume of normal operating noise.Always use quiet modeSelect this option when you wish to reduce the operating noise of the printer.Use quiet mode during specified hoursSelect this option when you wish to reduce the operating noise of the printer during a specified periodof time.Set the Start time and the End time of the quiet mode you wish to be activated. If both are set to thesame time, the quiet mode will not function.Important• You can set the quiet mode from the printer or the printer driver.No matter how you use to set the quiet mode, the mode is applied when you perform operationsfrom the printer or printing from the computer.Custom Settings dialog boxWhen you click Custom Settings, the Custom Settings dialog box is displayed.If necessary, switch between various modes of printer operation.Prevent paper abrasionThe printer can increase the gap between the print head and the paper during high-density printing toprevent paper abrasion.Check this check box to enable this function.Align heads manuallyUsually, the Print Head Alignment function on the Maintenance tab is set to automatic headalignment, but you can change it to manual head alignment.If the printing results of automatic print head alignment are not satisfactory, perform manual headalignment.Check this check box to perform the manual head alignment.Rotate 90 degrees left when orientation is [Landscape]On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation.To rotate the document 90 degrees to the left when printing, select the check box.424Downloaded from ManualsPrinter.com Manuals
