A Paper SourceShows the paper source supported by the printer, as well as information about the loaded paper. To update the papersource and media type settings in the printer driver, select the desired Paper Source option and click OK.Paper Detailed Settings Dialog BoxThe Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to the printerdriver help.Note• To display the Paper Detailed Settings dialog box, on the Main sheet, click Settings by Media Type.(See "Main Sheet →P.196 ")A Drying TimeSpecify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.• (See "Specifying the Ink Drying Time for Rolls →P.684 ")B Between PagesSpecify the time the printer waits after printing a page until ejecting the paper, as needed.C Between ScansSpecify the time the printer waits after printing a line on the page until printing the next line, as needed.D Roll Paper Margin for SafetyYou can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is heldfirmly against the Platen.E Near End MarginSpecify the length of the Near End Margin (the leading edge margin) of the roll, as needed.F Cut SpeedSelect the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automaticcutting is used.Windows Software > Printer Driver >Paper Detailed Settings Dialog Box iPF63004200
