Cannot cut paper.Cause Corrective ActionThere are sheets left on theEjection Guide.1. Press the OK button and remove the paper.2. Load paper.3. If "Not finished printing. Finish printing remaining jobs?" is shown on theDisplay Screen, press the OK button.Printing will resume, starting from the page on which the error occurred.(See "Loading Rolls in the Printer.") →P.674There is a foreign object bythe Output Tray, obstruct-ing the Cutter Unit.1. Lift the Top Cover and remove the foreign object.2. If "Not finished printing. Finish printing remaining jobs?" is shown on theDisplay Screen, press the OK button.Printing will resume, starting from the page on which the error occurred.You are not using the print-er under the recommendedenvironmental conditionsfor the paper.Use the printer only where the recommended environmental conditions for the paperare met. Note that various environmental conditions are recommended for varioustypes of paper. For details on the recommended environmental conditions, see thePaper Reference Guide.(See "Types of Paper.") →P.665You are using paper that isnot compatible with auto-matic cutting.1. Specify Manual as the cutting method and use scissors or a cutting tool to cut theroll.(See "Specifying the Cutting Method for Rolls.") →P.686For information about paper that is compatible with automatic cutting, see the Pa-per Reference Guide.(See "Types of Paper.") →P.6652. Press the OK button and remove the paper.In other cases, the CutterUnit may be damaged.Contact your Canon dealer for assistance.End of paper feed.Cause Corrective ActionYou are pressing the ▲ button on the Control Panel and trying to rewind the roll to theedge.Release the ▲ button.Borderless printng not possible.Cause Corrective ActionThe print job received specifiesa type or width of paper that isnot compatible with borderlessprinting.Follow these steps to change the settings of the print job to enable borderlessprinting.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. Make sure the correct printer driver for the printer is selected and try printingagain.For information on types of paper compatible with borderless printing, referto the Paper Reference Guide.(See "Types of Paper.") →P.665Select None when you have set Detect Mismatch on the control panel toWarning.However, note that this error may cause paper jams and affect the printing qual-ity.Error Message > Messages regarding paper >iPF6300 Cannot cut paper.12919