Setting DetailsFit Roll Paper Width *Displayed only if rolls are selected in Paper Source.Scaling This enlarges/reduces the entire image by the specified scaling value. Input thescaling value in numerical characters. You can specify a range between 5-600%.*You can change the numbers by clicking either ▲ or ▼.Note• This is not displayed when a checkmark is placed in Borderless Printing.Output Image SizeThe output image size is displayed up to one place after the decimal point in millimeters.Note• When Paper Size is smaller than Output Image Size, part of the image may not print.Paper SizeYou can select the size of the print media.Note• This is not displayed when a checkmark is placed in Borderless Printing.• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.OrientationThis selects the print orientation.The following settings are available for orientation.Setting DetailsPortrait Prints the image on the media as it appears on the screen.Landscape Prints the image on the media rotated 90 degrees.LayoutYou can select the print position of an image on the media.The following settings are available for layout.LayoutSetting DetailsUpper-Left of Output PaperSizePrints the image with fitting the top left of the active print area for Paper Size.Center of Output Paper Size Prints the center of the image on the center of the selected Paper Size.Specify Print Start Position You can print with specifying the top and left printing start positions in FromTop Margin and From Left Margin for Paper Size.From Top Margin Input the margin from the top of the media in numbers.*You can input between -9999 and 9999 mm.From Left Margin Input the margin from the left of the media in numbers.*You can input between -9999 and 9999 mm.Note• Select Print Area Layout or Image in Preview when you select Layout.Mac OS X Software > Print Plug-In for Photoshop/Digital Photo Professional >Page Setup Sheet iPF63005574
