Chapter 11-121.5 Names and Functions of Components1.5.1 Front 0023-1263iPF750 / iPF755F-1-18[1] Roll media coverOpen this cover, and then load roll media.[2] Media loading slotInsert media in this slot to load it.[3] Roll media temporary tableWhen loading roll media, place the roll holder here and then insert the media in the roll holder slot.[4] Release leverWhen releasing the paper retainer, press this lever backward.[5] Operation panelUse this panel to operate the printer or check the printer status.[6] Ink tank coverOpen this cover to replace the ink tank.[7] Media alignment lineThis orange line is used to align media.[8] Maintenance cartridge coverOpen this cover to replace the maintenance cartridge.[9] Maintenance cartridgeThis cartridge absorbs the ink used for maintenance. (Replace it when it becomes full of ink.)[10] Cutter unitThis cutter with a round blade is used to cut roll media automatically.[11] Cutter railThe cutter unit moves on this rail to cut media.[12] Paper eject slotAll printouts are ejected from this slot.[13] Output guideA printout is ejected along this guide.[14] Upper coverOpen this cover to install the printhead or remove the media jammed inside the printer.[15] Width guideWhen loading cassette paper, move this guide according to the paper size.[16] StandInstall the printer on this stand. This stand has casters for easy relocation.[3] [14] [15] [1][5][6][6][13][16][7][9][10][11][12][8][2] [3] [4]
